utahlooki.blogg.se

1. #Teamviewer wake on lan windows 10 2 hard drives android
2. #Teamviewer wake on lan windows 10 2 hard drives Pc

You’ll find these options under Extras > Options in TeamViewer. We’ll use TeamViewer as an example here because it’s the best solution for remotely accessing a PC’s desktop or even the files on its hard drive in our opinion.

#Teamviewer wake on lan windows 10 2 hard drives Pc

Remote access programs like TeamViewer and Parallels Access now have Wake-on-LAN support built-in, so you can skip some of the more tedious setup process and wake your PC with the remote-access program you already use. The tool can then send a “magic packet” with the correct information and - if you’ve configured everything correctly - your PC will wake up. Port Number: Enter the number of the UDP port you forwarded to the broadcast address. Subnet Mask: You’ll also have to enter the appropriate subnet mask for the computer behind the router. IP Address or Domain Name: Enter your router’s IP address on the Internet or a dynamic DNS address like. MAC Address: Enter the MAC address of the network interface listening for the Wake-On-LAN packet. When using any of these tools, you’ll need to enter four bits of information: Free Wake-on-LAN utilities are available for every platform you might want one for - here’s one for iPhone.

#Teamviewer wake on lan windows 10 2 hard drives android

For example, you could use the graphical Wake on LAN Windows program, a web interface that allows you to send a packet from your browser, or an Android app. We previously recommended depicus, whose website offers a variety of free Wake-On-LAN utilities for any platform you might want. There are many, many different options for sending Wake-On-LAN packets. Next, choose a tool for sending that magic packet.

You may want to look up information about forwarding Wake-on-LAN packets or forwarding packets to the broadcast address with your router. Some routers may not allow you to forward ports to this IP, so you may need to trick your router into allowing you to do this another way. If your PC has the IP address 192.168.0.123, you’d enter 192.168.1.255 as the broadcast address.Īccess your router’s configuration page and locate the port-forwarding screen to configure this. For example, if your PC has the IP address 192.168.1.123, you’d enter 192.168.1.255 as the broadcast address. To do this, you’ll need to forward the port to the “broadcast address,” which will broadcast the packet to all computers on a network. This is known as a “subnet directed broadcast.” The Wake-on-LAN packet must be forwarded to every device running behind your router, and a device will only wake up if the information in the WoL packet matches it. You’ll need to forward a UDP port to all IP addresses behind your router - you can’t just forward to a specific IP address. Many utilities use ports 7 or 9, but you can use any port you like for this.